HP StorageWorks 2/32 Brocade Fabric OS Message Reference - Supporting Fabric O - Page 279

27 FW-1437 FW-1437 Message , [FW-1437], ,, WARNING, , Switch status change contributing factor faulty ports: . (Port(s) . Probable Cause Indicates that the switch status is not in a healthy state. This occurred because the number of faulty ports is greater than or equal to the policy set by the switchStatusPolicySet command. A port is considered faulty due to hardware failure such as a faulty small form-factor pluggable (SFP) or port. Recommended Replace any faulty or deteriorating small form-factor pluggables (SFPs). Action Severity WARNING FW-1438 Message , [FW-1438], ,, WARNING, , Switch status change contributing factor Missing SFPs: missing SFPs. Probable Cause Indicates that the switch status is not in a healthy state. This occurred because the number of missing small form-factor pluggables (SFPs) is greater than or equal to the policy set by the switchStatusPolicySet command. Recommended Run the switchStatusPolicySet command to modify the SFP policy or to add SFPs to the empty Action ports. Severity WARNING FW-1439 Message , [FW-1439], ,, WARNING, , Switch status change contributing factor Switch offline. Probable Cause Indicates that the switch status is not in a healthy state. This occurred because the switch is offline. Recommended Run the switchEnable command. Action Severity WARNING Fabric OS Message Reference 231 53-1000437-01