HP StorageWorks 2/32 Brocade Fabric OS Message Reference - Supporting Fabric O - Page 228

27 FW-1171 FW-1171 Message , [FW-1171], ,, INFO, , , , is between high and low boundaries(High=, Low=). Current value is . Probable Cause Indicates that the number of signal losses that the port experiences has changed from a value outside of the acceptable range to a value within the acceptable range. Loss of signal generally indicates a physical problem. Recommended Action No action is required. Respond to this message as is appropriate to the particular policy of the end-user installation. Frequent loss of signal generally indicates a physical problem. Check both ends of your cable connection. Verify that the cable and small form-factor pluggables (SFPs) are not faulty. Severity INFO FW-1172 Message , [FW-1172], ,, INFO, , , , value has changed(High=, Low=). Current value is . Probable Cause Indicates that the number of protocol errors that the port experiences has changed. Occasional protocol errors occur due to software glitches. Persistent protocol errors occur due to hardware problems. Recommended Check both ends of your cable connection. Verify that the cable and small form-factor pluggables Action (SFPs) are not faulty. Severity INFO FW-1173 Message , [FW-1173], ,, INFO, , , , is below low boundary(High=, Low=). Current value is . Probable Cause Indicates that the number of protocol errors that the port experiences has fallen below the low boundary. Occasional protocol errors occur due to software glitches. Persistent protocol errors occur due to hardware problems. A low number of protocol errors means that the switch is functioning normally. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation. Severity INFO 180 Fabric OS Message Reference 53-1000437-01