HP StorageWorks 2/32 Brocade Fabric OS Message Reference - Supporting Fabric O - Page 432

63 SEC-1251 SEC-1251 Message , [SEC-1251], ,, ERROR, , Policy to binary conversion error: . Probable Cause Indicates that the security database conversion failed because of invalid values. The reason is specified in the text message variable and faulty value is printed in value variable. Recommended Action Retry the failed security command. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity ERROR SEC-1253 Message , [SEC-1253], ,, ERROR, , Bad DCC interface state during , state=. Probable Cause Indicates that an internal error has caused the device connection control (DCC) policy update to fail in the provision, commit, or cancel phases. Recommended Action Retry the failed security command. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity ERROR SEC-1300 Message , [SEC-1300], ,, INFO, , This switch is in VcEncode mode. Security is not supported. Probable Cause Indicates that the switch is set up with VC-encoded mode. Recommended Turn off VC-encoded mode before enabling security. Action Severity INFO 384 Fabric OS Message Reference 53-1000437-01