HP StorageWorks 2/32 Brocade Fabric OS Message Reference - Supporting Fabric O - Page 239

27 FW-1243 FW-1243 Message , [FW-1243], ,, INFO, , , is between high and low boundaries(High=, Low=). Current value is . Probable Cause Indicates that the number of end-to-end (EE) cyclic redundancy check (CRC) errors has changed from a value outside of the acceptable range to a value within the acceptable range. Invalid CRC messages occur when the number of CRC errors in Fibre Channel frames for specific source ID (S_ID) and destination ID (D_ID) pairs change. These messages might also be caused by dirty equipment, temperature fluctuations, and aging equipment. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation. Severity INFO FW-1244 Message , [FW-1244], ,, INFO, , , value has changed(High=, Low=). Current value is . Probable Cause Indicates that the number of end-to-end (EE) word frames that the switch receives has changed. Receive performance messages appear due to the number of word frames that travel from the configured S_ID to the D_ID pair. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation. Severity INFO FW-1245 Message , [FW-1245], ,, INFO, , , is below low boundary(High=, Low=). Current value is . Probable Cause Indicates that the number of end-to-end (EE) word frames that the switch receives has fallen below the low boundary. Receive performance messages appear due to the number of word frames that travel from the configured S_ID to the D_ID pair. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation. Severity INFO Fabric OS Message Reference 191 53-1000437-01