HP StorageWorks 2/32 Brocade Fabric OS Message Reference - Supporting Fabric O - Page 493

77 ZONE-1006 ZONE-1006 Message , [ZONE-1006], ,, WARNING, , WARNING WWN() in HARD PORT zone . Probable Cause Indicates that one or more devices are zoned as world-wide name (WWN) devices and also zoned as devices. The device(s) are used to specify zone members over separate zones. Recommended If hardware zoning enforcement is preferred, edit the zoning database to have the device zoned Action using only one specification type, either WWN or . Severity WARNING ZONE-1007 Message , [ZONE-1007], ,, INFO, , Ioctl() in () at port () returns code () and reason string (). Probable Cause Indicates that frame filter logic reported a failure during one of the IOCTL calls. The IOCTL call from which the failure is reported is listed as part of the error message. This is usually a programming error when adding content-addressable memory (CAM) entries before the filter setup. Recommended Action There are two ways to avoid this problem. • Avoid having too many hosts zoned with a set of target devices at a single port. • Avoid having too many zones directed at a single port group on the switch. Severity INFO ZONE-1008 Message , [ZONE-1008], ,, WARNING, , WARNING - port Out of CAM entries. Probable Cause Indicates that the total number of entries of S_ID CAM is above the limit while creating or adding a zone group. The maximum number of content-addressable memory (CAM) entries allowed depends on the application-specific integrated circuit (ASIC). Recommended If hardware zoning enforcement is preferred, edit the zoning database to have zoned PIDs for that Action port. Severity WARNING Fabric OS Message Reference 445 53-1000437-01