HP StorageWorks 2/32 Brocade Fabric OS Message Reference - Supporting Fabric O - Page 420

63 SEC-1163 SEC-1163 Message , [SEC-1163], ,, ERROR, , System is already in secure mode. Lockdown option cannot be applied. Probable Cause Indicates that the lockdown option was attempted while the fabric is already in secure mode. Recommended Do not use the lockdown option with the secModeEnable command when switch is already in Action secure mode. Severity ERROR SEC-1164 Message , [SEC-1164], ,, ERROR, , Lockdown option cannot be applied on a non-FCS switch. Probable Cause Indicates that the attempt to enable security is made on a switch that is not present in the fabric configurations server (FCS) list. Recommended Add the switch into the FCS policy list when using the lockdown option to enable security. Action Severity ERROR SEC-1165 Message , [SEC-1165], ,, ERROR, , Low memory, failed to enable security on all switches. Probable Cause Indicates that the system is low on memory. Recommended Wait a few minutes and try the command again. Action Severity ERROR 372 Fabric OS Message Reference 53-1000437-01