HP StorageWorks 2/32 Brocade Fabric OS Message Reference - Supporting Fabric O - Page 132

11 EM-1055 Severity INFO EM-1055 Message , [EM-1055], ,, WARNING, , : Port media incompatible. Reason: Probable Cause Indicates that an incompatible port media is detected. The possible causes are: • The port media is not capable of running at the configured port speed. • The port media generates too much heat to be used in the slot. Recommended Action Verify that the media can be run at the configured port speed. If the port media is extended long wavelength, move it to a port that can support the heat generated. Severity WARNING EM-1056 Message , [EM-1056], ,, WARNING, , : Port faulted. Reason: . Probable Cause Indicates a faulty port media is detected. The reason code for this message is for internal use only. This message is valid for only the Brocade 4100, 4900, 5000, 7500, and AP7600. Recommended Replace the defective small form-factor pluggable (SFP). Action Severity WARNING EM-1057 Message , [EM-1057], ,, WARNING, , Blade: is getting reset:. Probable Cause The blade is automatically reset due to known resetable transient errors, such as an application-specific integrated circuit.(ASIC) parity. error. Recommended Action No action is required if the switch does not reach the reset threshold for the switch/blade. If the reset threshold is reached on the switch/blade, the switch/blade will be faulted and should be replaced. Severity WARNING 84 Fabric OS Message Reference 53-1000437-01