HP StorageWorks 2/32 Brocade Fabric OS Message Reference - Supporting Fabric O - Page 202

26 FSSM-1004 FSSM-1004 Message , [FSSM-1004], ,, INFO, , Incompatible software version in HA synchronization. Probable Cause Indicates that the active control processor (CP) and the standby CP in a dual CP system are running firmware that are incompatible with each other. If the active CP fails, the failover will be disruptive. In a non-bladed system, this message is logged when the firmware upgrade/downgrade was invoked. The new firmware version is not compatible with current running version. This cause a disruptive firmware upgrade/downgrade. Recommended For a dual CP system, run the firmwareDownload command to load compatible firmware on the Action standby CP. For details on this command, refer to the Fabric OS Command Reference. Severity INFO 154 Fabric OS Message Reference 53-1000437-01