Icom IC-9700 Instruction Manual advanced - Page 100
Step 4: Removing the SD card, Step 5: Updating the repeater list, Import/Export, Load Setting
View all Icom IC-9700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 100 highlights
9. D-STAR OPERATION (BASIC) Updating the repeater list Step 3: Copying the CSV file to the SD card 1. Double-click the "9700_USA_yymmdd" folder created in the same place where the downloaded file is saved. 2. Copy the CSV file (Example: "9700_USA_Rpt_ yymmdd. csv") in the folder and paste it in the "RptList" folder ("IC-9700" > "Csv" > "RptList") of the SD card. Step 5: Updating the repeater list 1. Open the IMPORT/EXPORT screen. MENU » SET > SD Card > Import/Export 2. Touch "Import." 3. Touch "Repeater List." 4. Touch the CSV file to be loaded. (Example: 9700_USA_Rpt_yymmdd) 5. Touch [YES] or [NO]. Paste the copied CSV file in this folder. Step 4: Removing the SD card Turn OFF the transceiver, then remove the SD card from your PC, and insert it into the transceiver's slot. TIP: We recommends that you save the current data before loading other data into the transceiver. Transceiver PC •• YES: Retains the skip settings of the repeater list. (See page 10-25) •• NO: Does not retain the skip settings of the repeater list. 6. Touch "YES." •• Starts the import. •• After importing ends, "COMPLETED!" is displayed. 7. To complete the importing, reboot the transceiver. SD card From the memory card reader TIP: If you copy the ICF file to the "Setting" folder of the SD card, the repeater list can be updated with the same procedures. In that case, select "Load Setting" on the SD CARD screen. And on the LOAD FILE screen, select "Repeater List Only." MENU » SET > SD Card > Load Setting 9-12