Icom IC-9700 Instruction Manual advanced - Page 25
VOICE TX MEMORY FUNCTION, Recording a Voice TX memory
View all Icom IC-9700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
3. VOICE TX MEMORY FUNCTION Recording a Voice TX memory You can record up to 8 Voice transmit memories (T1 ~ T8) of up to one and a half minutes in each memory, onto an SD card. To transmit a recorded content using a Voice TX memory, first record the message, as described below. LLYou can record up to 1 and a half minutes in each memory. LLA user supplied SD card is required to use the Voice TX memory function. LLYou can also transmit the recorded content using an external keypad. DDRecording 1. Display the VOICE TX screen in the SSB, AM, FM or DV mode. MENU » VOICE 2. Touch [REC/SET]. 3. Touch the "REC" item. 5. Touch to start recording. •• Without holding down [PTT], speak into the microphone at your normal voice level. LLPreviously recorded content is overwritten. Adjust the Mic gain so that the "REC Level" meter reads less than 80% While Recording Touch to open the MIC GAIN adjustment window 6. Touch to stop recording. 7. To close the VOICE TX screen, push EXIT several times. DDPlaying back 1. On the selected memory's recording screen, touch to start playing back without transmitting. LTo stop the playback, touch . ••Opens the VOICE TX RECORD screen. 4. Select the desired Voice memory "T1" ~ "T8." (Example: T1) While playing 2. To close the VOICE TX screen, push EXIT several times. TIP: How to clear the recorded content Touching the Voice memory for 1 second in step 4 to the left, and then touch "Clear" in the Quick menu. 3-1