Icom IC-9700 Instruction Manual advanced - Page 147
Setting up the device, When using the Internal Gateway, function
View all Icom IC-9700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 147 highlights
11. ABOUT THE DV GATEWAY FUNCTION Setting up the device DDWhen using the Internal Gateway function Connecting the LAN cable Connect the transceiver to the router using the LAN cable. IC-9700 To the [LAN] port LAN cable Router Setting the Internal Gateway Settings 1. Open the INTERNAL GATEWAY SETTINGS screen. MENU » (2) > DV GW > Internal Gateway Settings 2. Touch to select the item to set. (Example: "Terminal/AP Call sign") 3. Enter a call sign, and then touch [ENT]. LLSee right for details on the setting items and their options. Gateway Repeater (Server IP/Domain) Enter the RS-RP3C's gateway repeater address or domain name. LLThe address consists of up to 64 characters. NOTE: You must have your call sign registered to the gateway server that has the RS-RP3C installed. Ask the gateway repeater administrator for details. Terminal/AP Call sign Enter the Terminal/AP call sign that is registered as the access point on the RS-RP3C's Personal Information screen. LLThe call sign consists of 8 characters. •• Enter spaces before the 8th character if necessary. •• Enter a desired ID suffix between A to F for the 8th character. Gateway Type (Default: Global) Select the gateway type. LLSelect "Global" when operating outside of Japan. Allowed Call Sign (Access Point Mode) (Default: Disable) Select to use the call sign restriction for the Access Point mode. When "Enabled" is selected, this allows only stations with registered call signs to transmit through the Internet. •• Disabled:Allows all call signs to transmit. •• Enabled: Allows only the call sign entered on the "Allowed Call sign List" to transmit. (See the next page.) LLWhen using the Terminal mode, select "Disabled." 4. To close the INTERNAL GATEWAY SETTINGS screen, push EXIT several times. 11-8