Icom IC-9700 Instruction Manual advanced - Page 164
DD MODE OPERATIONS, About the DD mode, Setting your PC
View all Icom IC-9700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 164 highlights
12. DD MODE OPERATIONS About the DD mode •• Data communication at 128 kbps Data PC PC •• Data can be sent through an internet connection to another station or through another repeater Data Server Setting your PC To operate in the DD mode, you need a network environment Local Area Network (LAN). LLThe communication in the DD mode is Peer to Peer. LLRefer to your PC manual for PC setting details. 1. Obtain the static IP address Set a static IP address to your PC. LLNote the current IP address before you change it. Communication without a repeater LLDo not set the same IP address between PCs. Example: Repeater Internet Repeater PC PC Browsing web sites Server Repeater Internet PC While in the DD mode and the "TX INHIBIT" is set to "OFF," the data is automatically sent when data is input from a PC. The received data is output on the PC. LLEach push of TRANSMIT toggles the "TX INHIBIT" ON or OFF. LLYou can change data output setting. MENU » SET > DV/DD Set > DD Packet Output LLPRECAUTION •• While the transmission inhibit is OFF, files in the shared folder may be modified or deleted, or unknown file(s) may be copied into the folder by other station. •• Icom assumes no responsibility whatever for any damages or lost profits resulting from opportunities for signal communications being lost because of the failure, malfunction, poor condition, damage, or data loss of this unit or because of such external causes as power failure. Icom also dismisses all responsibility for demands made by a third party. •• Since the transmitting data is not encrypted, the data can be received and decrypted by other stations. •• Connect the IC-9700 and PC using an Ethernet cable for Data mode operation before starting the DD mode operation. (see p. 12-2) •• Disconnecting the PC from any other network, ISP, LAN, and so on, is recommended. A network error may occur. •• For data transferring (PC-to-PC communication), a fixed IP address must be set, and folder is shared in the same workgroup between both PC. PC IP address: 192.168.0.100 Subnet mask: 255.255.255.0 PC IP address: 192.168.0.101 Subnet mask: 255.255.255.0 Communication using a repeater Set the IP address, subnet mask and the repeater's gateway address that are specified by the repeater administrator. Example: Server Repeater Internet Repeater PC IP address Gateway IP address: 10.0.0.9 PC Subnet mask: 255.0.0.0 Default gateway: 10.0.0.9 12-1