Icom IC-9700 Instruction Manual advanced - Page 18
Duplex operation, Data communication, Auto Repeater
View all Icom IC-9700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
1. ADVANCED OPERATIONS Duplex operation The Duplex operation shifts the transmit frequency up or down from the receive frequency by an offset amount. •• OFF: For simplex operation (the receive and transmit frequencies are the same). •• DUP-: The transmit frequency shifts down from the receive frequency by the offset amount. •• DUP+: The transmit frequency shifts up from the receive frequency by the offset amount. 1. Push FUNCTION . 2. Touch [w]. 3. Touch [DUP]. Data communication SSB-DATA, AM-DATA and FM-DATA modes You can operate the data mode using AFSK (Audio Frequency Shift Keying). LWhen operating PSK31, SSTV or JT65B with a PC application software, refer to the software's instruction manual. 1. Connect a PC or other device to the transceiver. LSee "FSK and AFSK connections" for the BASIC MANUAL. 2. Set the operating frequency and mode. 3. Refer to the application software for communication details. LWhen operating in the SSB data mode, adjust the device's output level within the ALC zone. ••Each touch selects "DUP-," "DUP+" or "OFF." 4. Touch [DUP] for 1 second. TIP: The carrier point is displayed when operating AFSK in the SSB data mode. See the illustration below for a tone-pair example. 2295 Hz 170 Hz -2125 Hz Space Mark Carrier point (displayed frequency) 5. Enter the frequency offset, and then touch [ENT]. NOTE: When the Auto Repeater function is ON, and the operating frequency is set out of the Repeater output frequency range, the duplex mode is automatically cancelled. MENU » SET > Function > Auto Repeater 1-14