Icom IC-9700 Instruction Manual advanced - Page 157
Set the frequency offset, Set the destination station call sign to UR, Hold down [PTT] to transmit
View all Icom IC-9700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 157 highlights
11. ABOUT THE DV GATEWAY FUNCTION Access Point mode operation DDMaking a Gateway call through the Access point transceiver When not using the DR function (Continued) 5. Set the frequency offset 1. Push [MENU]. 2. Select "DUP/TONE...." 6. Set the destination station call sign to "UR" 1. Hold down [CS] for 1 second to enter the Operating Call Sign Select mode. 2. Select "UR." 3. Set the destination repeater or destination station's call sign. LLIn the Access Point mode, you can select the "CQCQCQ" but cannot make a call. 3. Select "Offset Freq." 4. Set "0.000.00." 5. Push [MENU]. •• Returns to the standby screen. 4. Push [MENU]. •• Returns to the standby screen. 7. Hold down [PTT] to transmit LLIf you cannot receive a reply, see page 11-22 to read the tips to solve the problem. TIP: When the settings are saved into a memory channel, you can quickly select the settings. Read the Remote D-STAR transceiver's instruction manual for details. 11-18