Icom IC-9700 Instruction Manual advanced - Page 60
Setting D-PRS Position Mobile/Base, Setting the GPS TX Mode to D-PRS
View all Icom IC-9700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
8. GPS OPERATION (ADVANCED) Transmitting D-PRS data DDSetting D-PRS Position (Mobile/Base) Set to transmit as a D-PRS Position (Mobile/Base). LLSee page 8-3 for details. 1. Setting the GPS TX Mode to D-PRS MENU » GPS > GPS TX Mode > D-PRS 2. Checking the Unproto Address You should use the default address, and editing is not recommended. 3. Setting the TX format to "Position" 4. Setting the Symbol Select the Symbol that indicates your operating situation. LLSee page 8-29 to directly enter the Symbol. 5. Setting the SSID To assist in identifying your station's type, add the APRS® (Automatic Packet Reporting System) based SSID after the D-PRS data call sign. (p. 8-30) 6. Entering a comment Enter a comment, and transmit it with the D-PRS position data. LLThe number of characters you can enter differs, depending on the data extension and altitude settings. (p. 8-30) 1. Touch "Comment." 2. Push QUICK . 3. Touch "Edit." 4. Enter a comment. 5. After entering, touch [ENT]. 6. Push EXIT . 7. Setting the Time Stamp Set the Time Stamp function to transmit the received time data in UTC (Universal Time Coordinated) time. (p. 8-31) 8. Setting the Altitude Set the altitude data acquired from the GPS receiver. (p. 8-31) NOTE: If you transmit with the altitude setting ON, the character string is included in a comment on the products that cannot display the altitude. 9. Setting the Data Extension Set the data extension of your station's information. LLSet the Data Extension to "Course/Speed" to transmit as a mobile station. LLSet the Data Extension to "Power/Height/Gain/Directivity" to transmit as a base station. When you set the Data Extension to "Power/Height/Gain/Directivity": 9-1. Setting the TX power Select the TX power level of the base station, to transmit along with the position data. 9-2. Setting the antenna height Select the height of the base station's antenna, to transmit along with the position data. 9-3. Setting the antenna gain Select the gain of the base station's antenna, to transmit along with the position data. 9-4. Setting the antenna directivity Select the direction the base station's antenna was pointing, to transmit along with the position data. 14. Exiting the POSITION screen To close the POSITION screen, push EXIT several times. •• Returns to the standby screen, then is displayed. 8-13