Icom IC-9700 Instruction Manual advanced - Page 79
Object, Comment, Position, Entering the position information manually
View all Icom IC-9700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
8. GPS OPERATION (ADVANCED) GPS SET MENU » GPS > GPS TX Mode > D-PRS > TX Format > Object Comment Enter a comment. The number of characters you can enter differs, depending on the Data Extension and Altitude data entry. Data Extension Altitude OFF OFF Course/Speed Course/Speed Power/Height/Gain/Directivity Power/Height/Gain/Directivity - Entered - Entered - Entered Characters entered (maximum) 43 (Default) 35 36 28 36 28 The symbol " " displays the transmittable comment range. Please note that the characters that exceed the range will not be transmitted. Transmittable comment range display (In case of up to 28 characters) Position (Default: LATITUDE: 0º00'00"N, LONGITUDE: 0º00'00"E, ALTITUDE: ------ft) Displays the position information of the Object. Push QUICK to open the window shown below. TIP: When you select "Capture From GPS" or "Set From GPS Memory," you can capture the position from the GPS, or set the Object's position from the GPS memory. Entering the position information manually 1. Touch "Edit" on QUICK MENU. •• The POSITION EDIT screen is displayed. 2. Touch "LATITUDE." 3. Enter a latitude. LLTouch "N/S" to switch the north latitude and the south latitude. 4. Touch [ENT]. 5. Touch "LONGITUDE." 6. Enter a longitude. LLTouch "E/W" to switch the east longitude and the west longitude. 7. Touch [ENT]. 8. Touch "ALTITUDE." 9. Enter an altitude. LLAfter entering, touch [+/−] to switch "+" and "−." 10. Touch [ENT]. 11. Touch "." 12. Touch "YES." •• The position information is entered. 8-32