Icom IC-9700 Instruction Manual advanced - Page 29

4. MEMORY OPERATION Memory channels The Memory mode enables you to quickly select often-used frequencies, modes and other parameters. You can change the operating frequency, mode and so on while operating in the Memory mode. LLYou can temporarily tune the memory channel frequency by rotating MAIN DIAL . Memory channel 1 to 99 1A/1B ~ 3A/3B C1/C2 Displayed Regular memory channels. 1 frequency, 1 mode, 1 filter, memory name, tone settings (including tone frequencies for repeater and tone squelch) and select memory scan setting in each memory channel. Scan Edge memory channels. 1 frequency and 1 mode in each memory channel as scan edges for programmed scans. Call channels. LLCannot be left blank. Selecting a Memory channel DDSelecting with MULTI . 1. Push V/M to select the Memory mode. 2. Rotate MULTI until you select the Memory channel you want to use. LYou can also select the memory channel with [UP] and [DOWN] keys on the microphone. DDSelecting using the keypad 1. Push V/M to select the Memory mode. 2. Touch the MHz digit on the operating frequency. ••The BAND STACKING REGISTER screen is displayed. 3. Touch [F-INP]. ••The F-INP screen is displayed. 4. Enter the desired memory channel number. (Example: memory channel 2) 5. Touch [MEMO] to set the entered memory channel. Memory mode (Example: Memory channel 1) DDS electing a channel on the MEMORY screen 1. Push V/M to select the Memory mode. 2. Display the MEMORY screen. MENU » MEMORY 3. Rotate MULTI or MAIN DIAL , or touch [UP] or [DOWN] until the desired Memory channel is shown on the screen. 4. Touch the Memory channel you want to use. Memory channel 2 is selected DDSelecting a Call channel 1. Push CALL DR to select the Call channel mode. 2. Rotate MULTI to select the Call channel you want to use. 3. To return to the previous screen, push CALL DR . •• The channel is selected and automatically closes the MEMORY screen. 4-1