Icom IC-9700 Instruction Manual advanced - Page 23

RECORDER SET screen, RECORDER SET, TX REC Audio, RX REC Condition, File Split, REC Operation

Get Icom IC-9700 PDF manuals and user guides View all Icom IC-9700 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 23 highlights

2. VOICE RECORDER FUNCTIONS RECORDER SET screen You can change the recorder settings on this screen. MENU » RECORD > RECORDER SET TX REC Audio (Default: Direct) Select the transmit audio to record. ••Direct: Records the microphone audio. ••Monitor: Records the TX monitor audio. RX REC Condition (Default: Squelch Auto) Select the recording setting for receive. ••Always: Records even if no signal is received. ••Squelch Auto: Records only when the squelch opens. (The recording will be paused when the squelch closes while recording.) File Split (Default: ON) Turn the File Split function ON or OFF. ••OFF: The audio is continuously recorded into the file even if you switch between transmit and receive or the squelch status changes between open and closed. When the recording file's size becomes 2 GB, the transceiver continues to record, but to a new file. ••ON: While recording, if you switch between transmit and receive, or the squelch status changes between open and closed, a new file is automatically created in the same folder, and the audio is saved into the new one. REC Operation (Default: MAIN/SUB Link) Select the recording operation on the dual band display. ••MAIN/SUB Separate: The recording function is separately active/inactive on the selected band (MAIN band) when the function is started or stopped. ••MAIN/SUB Link: The recording function is simultaneously active/inactive on both MAIN and SUB bands when the function is started or stopped. LLOn the single band display, only displayed band (MAIN or SUB) is recorded. PTT Auto REC (Default: OFF) Turn the PTT Automatic Recording function ON or OFF. ••OFF: The recording does not start, even if a signal is transmitted. ••ON: The recording automatically starts when a signal is transmitted. The recording will stop when: ••10 seconds has passed after the last transmission. ••10 seconds has passed if no signal is received after the last transmission. - If you receive a signal within 10 seconds after the last transmission, the received audio is also recorded. - If you receive another signal within 10 seconds after the last reception, the received audio is also recorded. ••10 minutes has past while operating with the squelch is open in the SSB, CW, RTTY, or AM mode. ••The frequency or operating mode is changed. PRE-REC for PTT Auto REC (Default: 10sec) Select whether or not to record the audio that is received before the PTT Automatic Recording function is activated. ••OFF: Does not record the audio. ••5sec/10sec/15sec: Records the audio that is previously received in this set period of time. TIP: How to reset to the default setting Touching the item or its option for 1 second displays the Quick menu, and then touch "Default" to reset to the default setting. 2-5

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
2-5
2. VOICE RECORDER FUNCTIONS
RECORDER SET screen
You can change the recorder settings on this screen.
MENU
»
RECORD >
RECORDER SET
TX REC Audio
(Default: Direct)
Select the transmit audio to record.
• Direct:
Records the microphone audio.
• Monitor: Records the TX monitor audio.
RX REC Condition
(Default: Squelch Auto)
Select the recording setting for receive.
• Always:
Records even if no signal is received.
• Squelch Auto:
Records only when the squelch
opens.
(The recording will be paused when
the squelch closes while recording.)
File Split
(Default: ON)
Turn the File Split function ON or OFF.
• OFF:
The audio is continuously recorded into
the file even if you switch between transmit
and receive or the squelch status changes
between open and closed.
When the recording file’s size becomes
2 GB, the transceiver continues to record, but
to a new file.
• ON:
While recording, if you switch between
transmit and receive, or the squelch status
changes between open and closed, a new file
is automatically created in the same folder,
and the audio is saved into the new one.
REC Operation
(Default: MAIN/SUB Link)
Select the recording operation on the dual band display.
• MAIN/SUB Separate:
The recording function is
separately active/inactive
on the selected band (MAIN
band) when the function is
started or stopped.
• MAIN/SUB Link:
The recording function is
simultaneously active/inactive
on both MAIN and SUB
bands when the function is
started or stopped.
L
On the single band display,
only displayed band (MAIN or
SUB) is recorded.
PTT Auto REC
(Default: OFF)
Turn the PTT Automatic Recording function ON or
OFF.
• OFF:
The recording does not start, even if a signal
is transmitted.
• ON:
The recording automatically starts when a
signal is transmitted.
The recording will stop when:
• 10 seconds has passed after the last transmission.
• 10 seconds has passed if no signal is received after the
last transmission.
- If you receive a signal within 10 seconds after the last
transmission, the received audio is also recorded.
- If you receive another signal within 10 seconds after the
last reception, the received audio is also recorded.
• 10 minutes has past while operating with the squelch is
open in the SSB, CW, RTTY, or AM mode.
• The frequency or operating mode is changed.
PRE-REC for PTT Auto REC
(Default: 10sec)
Select whether or not to record the audio that is
received
before the PTT Automatic Recording
function is activated.
• OFF:
Does not record the audio.
• 5sec/10sec/15sec:
Records the audio that is previously received
in this set period of time.
TIP: How to reset to the default setting
Touching the item or its option for 1 second displays
the Quick menu, and then touch “Default” to reset to
the default setting.