Icom IC-9700 Instruction Manual advanced - Page 149
When using the RS-MS3W software, System requirements, Installing the RS-MS3W, COM port settings
View all Icom IC-9700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 149 highlights
11. ABOUT THE DV GATEWAY FUNCTION Setting up the device DDWhen using the RS-MS3W software The RS-MS3W is a Windows application to use with the External Gateway function. You can download it from the Icom website. System requirements The following are required to use the RS-MS3W. (As of March 2019) •• Operating System (OS) Microsoft® Windows® 7 (32/64bit) Microsoft® Windows® 8.1 (32/64bit) (Except for Microsoft® Windows® RT.) Microsoft® Windows® 10 (32/64bit) LLYou cannot use Windows Mobile. •• USB port USB 1.1 or 2.0 port •• Data cable OPC-2350LU data cable (purchase separately) NOTE: Before using the data cable, you have to install its USB driver. The latest USB driver and Installation Guide for the OPC-2350LU can be downloaded from "Options" section towards the bottom of the firmware page on the Icom website. Carefully read the guide, before installing the driver. http://www.icom.co.jp/world/support/download/firm/ COM port settings Set the data port. 1. After connecting, turn ON the transceiver. 2. Click "Com Port (P)" in the "Settings (S)." •• The Com Port Setting window is displayed. 3. Select the COM port number that the data cable is connected to. LLClick "▼" to display the COM ports on a drop-down list. LLSee the data cable's Installation Guide that you can download on the Icom website, for details on checking the COM port number. 4. Click . Setting the RS-MS3W Set the RS-MS3W to start using the DV Gateway function. Installing the RS-MS3W Download the latest RS-MS3W and its instruction manual from the Icom website. Read the RS-MS3W instruction manual on how to install the software. LLSearch by "RS-MS3W." http://www.icom.co.jp/world/support/download/firm/ Connecting the OPC-2350LU Connect the transceiver to the Windows device using the OPC-2350LU. IC-9700 To the [DATA] jack Windows device OPC-2350LU To a USB port NOTE: Turn OFF the transceiver before connecting or disconnecting the cable. LLThe screen may be different, depending on the application version. Read the RS-MS3W instruction manual about each setting item. NOTE: About the Firewall setting When you use a firewall security software, a communication error may occur by the firewall blocking the necessary ports or data. Before using the DV Gateway function, confirm that the RS-MS3W's communication is not blocked. LLAsk your firewall security software's manufacturer about the setting details. 11-10