Icom IC-9700 Instruction Manual advanced - Page 76
GPS SET, GPS Receiver Baud Rate
View all Icom IC-9700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
8. GPS OPERATION (ADVANCED) GPS SET NOTE: The default settings shown below are for the USA transceiver version. The default settings may differ, depending on your transceiver version. To return to your transceiver version's default settings, push QUICK and touch "Default" returns to the default setting. MENU » GPS > GPS Set GPS Select (Default: External GPS) Select how to capture position data. LLData communication is disabled when you select "External GPS." •• OFF: A GPS receiver is not used. •• External GPS: Position data of an external GPS receiver is used for the GPS functions. •• Manual: Manually enter the current Latitude, Longitude, and Altitude in Manual Position. GPS Receiver Baud Rate (Default: 9600) Select the baud rate of the GPS receiver. Manual Position (Default: LATITUDE: 0°00.00'N, LONGITUDE: 0°00.00'W, ALTITUDE: ------ft) Manually enter the latitude, longitude, and Altitude of your current position. LLYou can capture position data from the GPS receiver if "Capture From GPS" is selected. MENU » GPS GPS TX Mode (Default: OFF) Select a GPS transmission mode to send a GPS position data while in the DV mode. •• OFF: Does not transmit a GPS data. •• D-PRS: Transmits GPS data in the D-PRS format. •• NMEA: Transmits a GPS data in the NMEA format. MENU » GPS > GPS TX Mode > D-PRS Unproto Address (Default: API9700,DSTAR*) Displays an unproto address of up to 56 alphanumeric characters. NOTE: You should use the default address, and editing is not recommended. TX Format (Default: Position) Select the format to transmit the position data in the D-PRS mode. •• Position: T he caller station is the mobile or base station. •• Object: Transmits a certain location's information, such as an event, earthquake, and so on. (time stamp data is included.) •• Item: Transmits repeater or antenna information that needs no time information. (time stamp data is not included.) •• Weather: T ransmits weather information received from a weather device. MENU » GPS > GPS TX Mode > D-PRS > TX Format > Position Symbol (Default: House QTH (VHF)) Select the symbol that indicates your operating situation. The selected symbol channel's symbols (1~4) are transmitted along with the position data. Editing a symbol 1. Touch the symbol channel for 1 second. 2. Touch "Edit Symbol." 3. Push QUICK . 4. Touch "Direct Input." 5. Touch [+]/[−] to edit the second digit. 6. Touch [+]/[−] to edit the first digit. Selectable characters and symbols /, \, 0 to 9, A to Z A to Z, a to z, 0 to 9 7. After selecting, touch [SET]. •• Sets the Symbol into the channel selected in step 1. Selecting a preset symbol 1. Touch the symbol channel for 1 second. 2. Touch "Edit Symbol." 3. Touch the symbol. •• Sets the Symbol into the channel selected in step 1. 8-29