Icom IC-9700 Instruction Manual advanced - Page 36

5. SCANS SCAN SET screen 1. Display the SCAN screen. MENU » SCAN 2. Touch [SET]. 3. Touch an item to set. (Example: SCAN Speed) 4. Touch an option. (Example: Slow) 5. To close the SCAN SET screen, push EXIT . SCAN Speed (Default: Fast) Set the desired scan speed to slow or fast. ••Slow: Scan speed is slow. ••Fast: Scan speed is fast. SCAN Resume (Default: ON) Set the Scan Resume function to ON or OFF. ••OFF: When a signal is detected, cancels the scan. ••ON: When a signal is detected, the scan pauses for 10 seconds, then resumes. Two seconds after the signal disappears, the scan resumes. Pause Timer (Default: 10sec) When Scan Resume is ON, select the Scan Pause Timer. When receiving a signal, the scan pauses for this set period of time. ••2 ~ 20sec: When a signal is received, the scan pauses for 2 ~ 20 seconds (in 2 second steps). ••HOLD: The scan pauses on a received signal until the signal disappears. Resume Timer (Default: 2sec) Select the scan Resume Timer. When a received signal disappears, the scan resumes after this set period of time passed. ••0sec: The scan resumes immediately after the signal disappears. ••1 ~ 5sec: The scan resumes 1 ~ 5 seconds after the signal disappears. ••HOLD: The scan remains paused for the Pause Timer setting, even if the signal disappears. Temporary Skip Timer (Default: 5min) Set the Temporary Skip Timer. The unwanted frequencies that are set as Skip channels (PSKIP or SKIP) are skipped for this set period of time during a scan. LLThis timer is activated for the VFO scan, Memory scan, and DR scan. ••5min/10min/15min: Skip channels are skipped for the set period of time. ••While Scanning: Skip channels are skipped until the Scan is stopped. ••While Powered ON: Skip channels are skipped until the receiver power is turned OFF. TIP: How to reset to the default settings Touching an item or its option for 1 second displays the Quick menu, and then touch "Default" to reset to the default setting. 5-3