Icom IC-9700 Instruction Manual advanced - Page 162
When using the Internal Gateway, Terminal mode or Access Point
View all Icom IC-9700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 162 highlights
11. ABOUT THE DV GATEWAY FUNCTION Troubleshooting DDTroubleshooting for the Access Point mode operation PROBLEM POSSIBLE CAUSE SOLUTION REFERENCE After your call, the repeater •• The Remote D-STAR transceiver's •• Set the Remote transceiver's The Remote replies "RX" or "RPT?" and call sign has not been set to the call sign has not been set to the D-STAR the Access Point call sign and transceiver. transceiver. transceiver's ID suffix "G." •• The Remote D-STAR transceiver's •• Register The Remote D-STAR instruction call sign has not been registered at transceiver's call sign at a gateway manual a gateway server. server. •• The Terminal/AP call sign that is set •• When using the Internal Gateway p. 11-8 in the transceiver, RS-MS3A, or RS- function, register the Terminal/AP MS3W has not been registered to call sign that is set in the transceiver the RS-RP3C as the access point. to the RS-RP3C as the access point. •• When using the External Gateway RS-MS3W, function, register the Terminal/AP RS-MS3A's call sign that is set in the RS-MS3A instruction or RS-MS3W to the RS-RP3C as manual the access point. •• Destination station's call sign (UR) •• Check the destination station's - has not been registered to the register information. gateway server, or the registered contents do not match your transceiver's setting. •• A wrong destination repeater's call •• Set the correct destination p. 11-15 sign is set to "TO." •• The settings are wrong. repeater's call sign to "TO." •• When using the Internal Gateway p. 11-8 function, correctly set the transceiver's Internal Gateway settings. •• When using the External Gateway RS-MS3W, function correctly set the RS-MS3W RS-MS3A's or the RS-MS3A. instruction manual •• Destination station that uses the •• Destination station makes a call. - Terminal mode or Access Point mode does not transmit periodically. After your call, the repeater •• The repeater cannot connect to the •• Wait for a while, and try again. - replies 'RPT?' and the access destination repeater. repeater's call sign. •• The repeater is busy. "L" appears on the LCD. •• While receiving through the Internet, •• Wait for a while, and try again. - some packets may be lost due to LLWhen the transceiver receives network error (poor data throughput corrupted data, and misidentifies performance). it is as Packet Loss, "L" is displayed. "DV" and "FM" icons •• While in the DV mode, an FM signal •• Use a different operating frequency - alternately blink. is received. until there are no FM signals on the You can transmit, but cannot •• A Global IP address is not used. original frequency. •• Check the Internet connection and pp. 11-4 ~ 11-7 receive from the destination use a Global IP address. repeater. •• The router or mobile router's port is •• Forward the router or mobile pp. 11-4, 11-7 not correctly forwarded. router's correct port. •• The firewall is blocking the •• Check your firewall settings. p. 11-10 necessary port. 11-23