Icom IC-9700 Instruction Manual advanced - Page 135
Skip setting for the DR scan, <Individual skip setting>, Repeater List
View all Icom IC-9700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 135 highlights
10. D-STAR OPERATION (ADVANCED) Entering new information into the repeater list DDSkip setting for the DR scan You can set repeaters as scan skip repeaters. The selected repeaters are skipped for faster scanning. You can set the skip setting to all repeaters in the selected repeater group, or to individual repeaters. LWhen a repeater is set as a skip repeater, its "USE (FROM)" setting is automatically set to "NO." In that case, the repeater cannot be selected in "FROM" (Access repeater) on the DR screen. 1. Open the REPEATER GROUP screen. MENU » (2) > DV/DD Memory > Repeater List 2. Select a repeater group where the repeater you set the skip setting is listed. On the REPEATER GROUP screen, push QUICK , then select "SKIP All ON" to skip the repeaters in the group during the DR scan. 3. Touch the repeater to be skipped for 1 second. LLTo cancel the skip settings in the group, select "SKIP All OFF." TIP: ••When you select "Repeater List" on the FROM SELECT screen, you can set the skip setting as described to the left. 4. Touch "SKIP." ••When "FROM" is selected on the DR screen, push QUICK to set the skip setting, as shown below. Rotate MAIN DIAL to select SKIP, then touch it. ••Displays "SKIP" in the upper right corner. LSelect "SKIP" again to cancel the skip setting. LSelect "SKIP All ON" to set the skip setting to all repeaters in the group. 5. Push EXIT several times to close the Repeater List screen. 10-33 LDisplays "SKIP" in the "FROM" field.