Icom IC-9700 Instruction Manual advanced - Page 153
Access Point mode operation, Setting the Access Point mode
View all Icom IC-9700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 153 highlights
11. ABOUT THE DV GATEWAY FUNCTION Access Point mode operation DDSetting the Access Point mode In this section, set an Access Point transceiver. 1. Open the DV GATEWAY screen. MENU » (2) > DV GW 2. Touch "." Internal Gateway icon "Ext" is displayed when using the External Gateway function. 3. Rotate MAIN DIAL to set the operating frequency. LLThe frequency is used to communicate with the Remote D-STAR transceiver. LLIn the Access Point mode, you can change the operating frequency. NOTE: BE SURE to check your local regulations or laws to select the appropriate operating frequency. TIP: Canceling the Access Point mode Touch "" in the DV GATEWAY screen. MENU » (2) > DV GW > LLWhen using the External Gateway function, click (touch) in the RS-MS3W or RS-MS3A before the transceiver returns to the normal mode. About the Internal Gateway icon When using the Internal Gateway function, displays the communication status. Icon Status In the standby mode While transmitting While receiving Transmission error (The repeater is busy.) Transmission error Network error Receiving while transmitting Receive error LLIf an error icon is displayed, see page 11-19 to read the tips to solve the problem. When using the External Gateway function After the transceiver is in the Access Point mode, click (touch) in the RS-MS3W or RSMS3A. LLIf an error message is displayed, see page 11-24 to read the tips to solve the problem. NOTE: In the Access Point mode •• The Following items are automatically set. Mode: VFO mode* Operating mode: DV mode* Dualwatch function: OFF* Duplex mode: OFF* AFC function: OFF RIT function: OFF VOX function: OFF MONITOR function: OFF * These settings do not return to the previous settings, even if you cancel the Access Point mode. •• The Access Point mode is not automatically canceled even if you turn OFF the transceiver, then turn it ON again. 11-14