Icom IC-9700 Instruction Manual advanced - Page 123
Recording an Auto Reply message, When receiving a position data, DV A-RPLY, The DV AUTO REPLY screen
View all Icom IC-9700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 123 highlights
10. D-STAR OPERATION (ADVANCED) Automatic Reply function DDRecording an Auto Reply message You can record an Auto Reply message and save it on an SD card to reply to the call with your voice. NOTE: Confirm an SD card is in the card slot. 1. Open the DV Auto Reply screen. MENU » (2) > DV A-RPLY 2. Touch " " to start recording. The DV AUTO REPLY screen Audio level is Adjust the Mic gain so that the REC displayed Level does not reach to this range. •• Touch " •• Touch " " to stop recording. " to playback the recorded message. LL Informatio ••The Maximum recording time is 10 seconds. ••Hold the microphone 5 ~ 10 cm (2 ~ 4 inches) from your mouth, then speak at your normal voice level. ••Touch [MIC GAIN] to open the MIC GAIN ADJUST screen. ••Only 1 message can be recorded. The current contents is overwritten if you record again. 3. To close the DV Auto Reply screen, push EXIT . TIP: To delete the recorded message, push QUICK on the DV AUTO REPLY screen, then touch [Clear]. DDWhen receiving a position data When you transmitted a call to a station and the station automatically replies with the station's position data, the received position data is displayed in a window. LDistance and direction are displayed only when the "GPS Select" item is set to "Manual." (MENU > GPS > GPS Set > GPS Select) LYou can turn OFF the caller's position display. (MENU > SET > Display > Reply Position Display) 1. Transmit to the station. JG3LUK Your station Destination 2. The position data is automatically transmitted. 3. Received position data is displayed. Scrolls received call sign or the TX message. 10-21