Icom IC-9700 Instruction Manual advanced - Page 14
About the RTTY decode set mode, Displayed Characters during Tx Satellite
View all Icom IC-9700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
1. ADVANCED OPERATIONS Operating RTTY (FSK) DDAbout the RTTY decode set mode This set mode is for the FFT scope setting, USOS function, and so on. 1. Open the RTTY DECODE screen in the RTTY mode. MENU » DECODE 2. Touch [EXPD/SET] for 1 second. ••Opens the RTTY DECODE SET screen. 3. Select the desired item to set (Example: FFT Scope Averaging) 4. Select the desired option or setting. (Example: 2) 5. To close the RTTY DECODE screen, push EXIT several times. TIP: How to reset to the default setting Touching the item or its option for 1 second displays the Quick menu, and then touch "Default" to reset to the default setting. FFT Scope Averaging (Default: OFF) Set the FFT scope waveform averaging function to between 2 and 4 or to OFF. LUse the default or smaller FFT scope waveform number for tuning. FFT Scope Waveform Color (Default: R: 51, G: 153, B: 255) Set the color of the FFT scope waveform. LTouch and select the R (Red), G (Green) or B (Blue) scale, and then rotate MULTI or MAIN DIAL to adjust the ratio to between 0 and 255. LThe color is displayed in the box above the RGB scale. Decode USOS (Default: ON) Turn the letter code decoding capability ON or OFF after receiving a "space." LUSOS stands for UnShift On Space function. ••ON: Decodes as a letter code. ••OFF: Decodes as a character code. Decode New Line Code (Default: CR, LF, CR+LF) Select the internal RTTY decoder new line code. LCR stands for Carriage Return, and LF stands for Line Feed. ••CR,LF,CR+LF: Makes a new line with any codes. ••CR+LF: Makes a new line with only CR+LF code. TX USOS (Default: ON) Explicitly inserts the FIGS character, even though it is not required by the receiving station. ••ON: Inserts FIGS ••OFF: Does not insert FIGS Displayed Characters during Tx (Satellite) (Default: TX) Select the character to display during the Satellite operation. ••RX: Displays decoded characters ••TX: Displays transmitted characters Font Color (Receive) (Default: R: 128, G: 255, B: 128) Font Color (Transmit) (Default: R: 255, G: 106, B: 106) Set the text font color for received or transmit characters. LTouch and select the R (Red), G (Green) or B (Blue) scale, and then rotate MULTI or MAIN DIAL to adjust the ratio to between 0 and 255. LThe color is displayed in the box above the RGB scale. 1-10