Icom IC-9700 Instruction Manual advanced - Page 30
Entering memory channel contents
View all Icom IC-9700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
4. MEMORY OPERATION Entering memory channel contents The operating frequency, operating mode, IF filter bandwidth, and so on can be entered to each memory channel. NOTE: New content you enter will overwrite any content already in the selected memory. 1. Push V/M to select the VFO mode. 2. Set the frequency and operating mode. 3. Hold down kHzM-CH for 1 second. "M-CH" is selected 4. Rotate MULTI to select the Memory channel to enter the contents set in step 2. (Example: 2) LLIf "BLANK" is displayed under the selected memory channel number, it is a blank channel, meaning that no contents are entered in that channel. 5. Touch the Memory channel number. 6. Touch [MW] for 1 second until BLANK disappears from below the channel number. •• The contents are entered in the selected Memory channel, and BLANK is not displayed below the channel number. 7. To close the VFO/MEMORY screen, push EXIT . 4-2