Icom IC-9700 Instruction Manual advanced - Page 152
Operating in the Terminal mode, Example: Making a Gateway CQ call
View all Icom IC-9700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 152 highlights
11. ABOUT THE DV GATEWAY FUNCTION Terminal mode operation DDOperating in the Terminal mode Example: Making a Gateway CQ call 1. Touch "TO." 2. Touch "Gateway CQ." NOTE: In the Terminal mode, you can make a Gateway CQ call, or a call to a specific station, using call sign routing. LLYou cannot make a call if you select "Local CQ" or "Reflector." Example: Making a call to a specific station 1. Touch "TO." 2. Touch "Your Call Sign." 3. Select the repeater group where your destination repeater is listed. 3. Select your destination station. (Example: Rick) •• Returns to the DR screen, and the selected name is set in "TO." 4. Select your destination repeater. (Example: Hirano/Icom) •• Returns to the DR screen, and selected repeater name is set in "TO." 4. Push TRANSMIT , or hold down the microphone's [PTT] to transmit. •• While transmitting, the TX/RX indicator lights orange. LLWhile receiving a signal through the Internet, you cannot transmit. LLIf you cannot receive a reply, see page 11-20 to read the tips to solve the problem. 5. Push TRANSMIT , or hold down the microphone's [PTT] to transmit. •• While transmitting, the TX/RX indicator lights orange. LLWhile receiving a signal through the Internet, you cannot transmit. LLIf you cannot receive a reply, see page 11-20 to read the tips to solve the problem. 11-13