Icom IC-9700 Instruction Manual advanced - Page 144
Port forwarding, UDP should be used as the port protocol.
View all Icom IC-9700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 144 highlights
11. ABOUT THE DV GATEWAY FUNCTION Setting up a network DDWhen connecting your device to the Internet using a router (Continued) LAN cable *1 Needs a Global IP address. Internet *2 OPC-2350LU *2 *1 *2 *1 A static IP address to the transceiver, Windows, or Android device is recommended. *2 Forward port number 40000. OPC-2350LU *1 3. Port forwarding When using a router, enable communication with the Internet, as described below. •• Forward the port number 40000 to the transceiver, Windows, or Android device. •• "UDP" should be used as the port protocol. •• Set a static local IP address in Procedure 2 (2. Setting a static local IP address) as a destination port. LLAsk the router's manufacturer about how to forward the port. LLOnly one transceiver, Windows, or Android device connected to the router can use the DV Gateway function at the same time. LLDepending on the router settings, you must configure the IP filter settings. Check the router's manual on how to configure the settings. When using the Internal Gateway function, go to "Setting up the transceiver." (p. 11-8) When using a Windows device, go to "Setting up the RS-MS3W." (p. 11-10) When using an Android device, go to "Setting up the RS-MS3A." (p. 11-11) 11-5