Icom IC-9700 Instruction Manual advanced - Page 75
Setting the GPS Alarm function to RX, a caller station, GPS Alarm, Information, Alarm Area RX/Memory
View all Icom IC-9700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
8. GPS OPERATION (ADVANCED) GPS Alarm DDSetting the GPS Alarm function to RX (a caller station) 1. Open the GPS ALARM screen. MENU » GPS > GPS Alarm 2. Touch "Alarm Select." 3. Touch "RX." LLInformation •• When a station with its GPS Alarm set enters within an approximate 1 kilometer (1094 yard) range, the alarm sounds once. When it enters within an approximate 500 meter (547 yard) range, the alarm sounds 3 times. •• When the transceiver sounds a GPS Alarm, "GPS ALARM" pops up on the screen, and " " blinks. See the illustration below. •• To cancel the GPS Alarm function, touch "OFF" in step 3 to the left. Blinks LLIf you want to set the alarm to a specific GPS Memory, touch "Memory" and then select a GPS Memory in a GPS Memory group. 4. To close the GPS ALARM screen, push EXIT several times. "GPS ALARM" pops up on the screen and the alarm sounds, depending on the set range. NOTE: Even if "RX" is selected in step 3, when the received signal has no position data, the GPS Alarm does not sound. TIP: When selecting "RX" or a specific GPS Memory in step 3 to the left, you also have to set Alarm Area (RX/Memory) to use the GPS Alarm function. MENU » GPS > GPS Alarm > Alarm Area (RX/Memory) 8-28