Icom IC-9700 Instruction Manual advanced - Page 154
Making a Gateway call through the Access point transceiver, When using the DR function
View all Icom IC-9700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 154 highlights
11. ABOUT THE DV GATEWAY FUNCTION Access Point mode operation DDMaking a Gateway call through the Access point transceiver In this section, set up a Remote D-STAR transceiver you are going to operate. LLRead the Remote D-STAR transceiver's instruction manual for setting details. NOTE: While in the Access Point mode, you can make a Gateway CQ call or a call to an individual station using call sign routing. LLYou can select the "Local CQ," but cannot make a call. When using the DR function NOTE: If you have imported the Repeater List, you have to register the Access Point information again because the Repeater List is overwritten. Example: W hen setting the operating frequency to 430.850 MHz, and making a Gateway CQ call. In this document, the ID-51A (PLUS2)/ID-51E (PLUS2) is used as a Remote D-STAR transceiver as an example. Remote D-STAR transceiver*1 Access point Internet Other station Operating frequency: 430.850 MHz UR: /JP1YIU A MY: JL3YRP Operating frequency: 430.850 MHz MY Call Sign: JA3YUA Terminal/AP Call sign*2: JA3YUA D Hamacho 430 (JP1YIU A) 1. Register the Access Point information to the Repeater List LLRegister the Access Point information in the MENU screen. (MENU > DV Memory > Repeater List) 1. Select a group you want to add your Access Point information to. 2. After selecting a group, open the Repeater List Edit screen. (QUICK MENU > Add) *1 Any model as long as the transceiver is D-STAR capable. Only one D-STAR transceiver can use the Access Point at a same time. *2 When you use the External Gateway function, enter the Call sign in "Terminal/AP Call sign" in the RS-MS3W or RS-MS3A. 3. Set "DV Repeater" to "TYPE." LL"DV Repeater" is used for Repeater operation in the DV mode. 4. Enter your favorite name into "NAME" and "SUB NAME." (Example: MY AP) 5. Set the Access Point transceiver's call sign to "CALL SIGN." (Example: JL3YRP) LLAfter setting "CALL SIGN," "GW CALL SIGN" is automatically set. 11-15