Icom IC-9700 Instruction Manual advanced - Page 116
Message operation, Entering a TX message, Transmitting a message
View all Icom IC-9700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 116 highlights
10. D-STAR OPERATION (ADVANCED) Message operation You can save up to 5 short messages in the transceiver's memory to transmit in the DV mode. Each message can be up to 20 characters. DDEntering a TX message Example: E ntering "JAPAN TOM" into TX message memory number 1. 1. Open the TX MESSAGE (DV) screen. MENU » SET > My Station > TX Message (DV) 2. T ouch a TX message memory number for 1 second. DDTransmitting a message You can transmit a preset TX message by pushing [PTT] in the DV mode. First, select a TX message which also turns ON the Message Transmission function. 1. Open the TX MESSAGE (DV) screen. MENU » SET > My Station > TX Message (DV) 2. Touch a TX message memory number. 3. Touch "Edit." 4. Enter a message of up to 20 characters, then touch [ENT]. Selectable characters and symbols A to Z, a to z, 0 to 9 space) ••Returns to the TX MESSAGE screen. 5. To close the TX MESSAGE (DV) screen, push EXIT . LTo not transmit any message, select "OFF." 3. To close the TX MESSAGE (DV) screen, push EXIT . LL Informatio ••The message is transmitted with your voice signal. ••The message is transmitted each time you transmit. ••When continuously transmitting, the selected TX message is transmitted every 30 seconds. DDDeleting a TX message You can delete the TX messages. MENU » SET > My Station > TX Message (DV) Example: Deleting TX message "JAPAN TOM" from TX message memory number 1. 1. Push MENU . 2. Touch a TX message memory number for 1 second. 3. Select "Clear." 4. 10-14 ••The confirmation dialog is displayed. Touch . ••Clears the entered message. LTo exit the MENU screen, push MENU .