Icom IC-9700 Instruction Manual advanced - Page 16
DTCS code squelch operation, TONET/DTCSR T in T-DTCS blinks
View all Icom IC-9700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
1. ADVANCED OPERATIONS DTCS code squelch operation FM mode The Tone squelch opens only when you receive a signal that includes a matching DTCS code in the FM mode. You can silently wait for calls from other stations using the same tone. When you transmit, the DTCS code is superimposed on your own signal. 1. Push FUNCTION . ••Opens the FUNCTION screen. 2. Touch [TONE]. About the tone squelch types indication DTCS: DTCS Code function DTCS(T) ("DTCS" blinks): DTCS code in TX, Tone off in RX TONE(T)/DTCS(R) ("T" in "T-DTCS" blinks): Repeater tone in TX, DTCS code squelch in RX DTCS(T)/TSQL(R) ("D" in "D-TSQL" blinks): DTCS code in TX, Tone squelch in RX 3. Touch to select the Tone squelch mode. 4. Touch [TONE] for 1 second. ••Opens the TONE FREQUENCY screen. Checking another station's DTCS code You can check another station's tone code by tone scanning while the station is transmitting. 1. Touch [T-SCAN]. Blinks while scanning ••The scan starts, and then stops when the matching DTCS code as another station is received. 2. To close the TONE FREQUENCY screen, push EXIT . ••Selectable DTCS codes 023 054 125 165 245 274 356 445 506 627 732 025 065 131 172 246 306 364 446 516 631 734 026 071 132 174 251 311 365 452 523 632 743 031 072 134 205 252 315 371 454 526 654 754 032 073 143 212 255 325 411 455 532 662 036 074 145 223 261 331 412 462 546 664 043 114 152 225 263 332 413 464 565 703 047 115 155 226 265 343 423 465 606 712 051 116 156 243 266 346 431 466 612 723 053 122 162 244 271 351 432 503 624 731 5. Rotate MAIN DIAL to set the tone frequency. 1-12