Icom IC-9700 Instruction Manual advanced - Page 39

5. SCANS Memory scan DDSelect Memory scan operation 1. Select the Memory mode. 2. Display the SCAN screen. MENU » SCAN 3. Touch [MEMO] for 1 second. 4. Touch the Select Memory channel number. (Example: 1) Blinks Mode Select scan Ch 1 FM Ch 2 AM Ch 3 FM Ch 4 FM Ch 99 Only Memory channels set to the FM mode FM are scanned. Ch 98 FM Ch 50 DV Ch 7 AM Ch 6 FM Ch 5 FM (Example: FM channels) Repeatedly scans memory channels (except1A/1B ~ 3A/3B, C1 and C2) that is set to the mode selected before starting the scan. DDMode Select scan operation 1. Select the Memo 2. Set the operating mode. 3. Open the SCAN screen. MENU » SCAN 4. Touch [MEMO] for 1 second. •• Select Memory scan starts. LWhen a signal is detected, the scan pauses according to the "SCAN Resume" setting, and then resumes. LLTouch [SELECT] to return to the regular Memory scan. LLWhile scanning, touch [SEL No.] to select the Select Memory scan number. •• To cancel the scan, touch [MEMO]. 5. To close the SCAN screen, push EXIT . Clearing all Select Memory channels 1. Touch [SELECT] for 1 second on the SCAN screen. ••The SELECT ALL CLEAR screen is displayed. 2. Touch the Select Memory channels to clear. 5. Touch [MODE SELECT SCAN]. •• Mode Select scan starts. LWhen a signal is detected, the scan pauses according to the "SCAN Resume" setting, and then resumes. •• To cancel the scan, touch [MEMO]. 6. To close the SCAN screen, push EXIT . 5-6