Icom IC-9700 Instruction Manual advanced - Page 102
To make a Local Area CQ call, To select from TX History
View all Icom IC-9700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 102 highlights
9. D-STAR OPERATION (BASIC) "FROM" (Access repeater) setting Set by rotating MAIN DIAL : Rotate MAIN DIAL to select a repeater or Your Call Sign that is displayed on the DR screen. This operation is disabled when "CQCQCQ" is set.) TIP: After you receive the individual station or repeater's signal, the call sign can be captured by holding down the Call Sign Capture key (TONE RX→CS ), and you can quickly and easily reply to a call. To make a Local Area CQ call: Set "CQCQCQ" in "TO" (Destination). To make a Gateway CQ call: Select a repeater from the repeater list, if you want to make a Gateway call. To make a call to a specific station: Select the station call sign in the Your Call Sign. To make a call through a reflector: Select a reflector that is connected to the repeater you want to call through. To select from RX History: When you receive a call, the caller station data is saved in RX History. You can select the destination from the record. To select from TX History: When you make a call, the destination repeater or called station data is saved in TX History. You can select the destination from the record. To directly enter the destination station call sign: Directly enter the destination station's call sign. To directly enter the destination repeater call sign: Directly enter the destination repeater's call sign. 9-14