Kyocera TASKalfa 3501i Fax System (W) Operation Guide Rev-2.2013.1 - Page 61
Dialing the Same Receiving System (Redial), Automatic Redial, Manual Redial (Recall)
View all Kyocera TASKalfa 3501i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
FAX Operation (Basic) > Dialing the Same Receiving System (Redial) Dialing the Same Receiving System (Redial) Redial is a function allowing you to dial the last entered number once again. When [Recall] is set to [Prohibited] in the system menu, you cannot use Redial. For details, refer to the Operation Guide for the machine. (8 Setup and Registration (System menu) > Send > Recall) Automatic Redial This function automatically redials a receiving system that does not respond when you try to send fax. No particular setting is required for automatic redial. Because the machine redials repeatedly at a regular interval, you do not need to worry even when the communication by the receiving system is prolonged. NOTE When using direct transmission, the machine does not automatically redial. You can change the number of automatic redials from between 0 and 14. For details, refer to Retry Times on page 6-16. You cannot send delayed transmission immediately while the machine is waiting for redial. Manual Redial (Recall) Use this when the receiving system does not respond when you have tried to send a fax. When you want to send the fax to the same receiving system, press [Recall], and you can call the receiving system you dialed on the destination list. 1 Press [Recall]. The receiving system you dialed is displayed on the destination list. Enter Destination. ABCD Pause Space [email protected] 001/001 Backspace Destination Address Book FAX No. Entry On Hook Direct Chain Detail Delete Recall 0001 0002 0003 0004 0005 No. AAA BBB CCC DDD EEE 0006 0007 0008 FFF GGG HHH III 0009 0010 JJJ 1/100 Destination Status Quick Setup Org./Sending Data Format Image Quality Advanced Setup Check Destinations Program 02/02/2013 10:10 NOTE When the last transmission included multi-address transmissions and computers and e-mail destinations, they are also displayed. If necessary, add or delete the receiving system. 2 Press the [Start] key. The transmission will start. NOTE When On is selected in Dest. Check before Send, a destination confirmation screen is displayed when you press the [Start] key. For details, refer to Confirmation Screen of Destinations on page 5-12. Recall information is canceled in the following conditions. • When you turn the power off • When you send a next fax (new recall information is registered) • When you log out 3-23