Lexmark Optra C710 Setup Guide - Page 101
Novell NetWare, World Wide Web
View all Lexmark Optra C710 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 101 highlights
Novell NetWare NDPS (Novell Distributed Print Services) 1 Make sure the TCP/IP protocol is turned on (activated) in the print server. To find out, print a network setup page and look in the paragraph under TCP/IP. 2 Make sure your NetWare file server has TCP/IP support configured and loaded. 3 Make sure you are running NDPS version 2.0 or later. 4 Make sure you've created and loaded an NDPS Manager. 5 Read the online documentation about Lexmark's NDPS support. Look for a README file or a technical white paper in the package you downloaded from Lexmark's web site. 6 If you are still having trouble, contact Lexmark for help at 1-800-LEXMARK (1-800-539-6275) or on the World Wide Web at http://www.lexmark.com. Non-NDPS (queue-based) 1 Make sure the NetWare protocol is turned on (activated) in the print server. To find out, print a network setup page and look in the paragraph under NetWare. 2 Find out if the print server is servicing your NetWare queue. 3 If your queue doesn't appear in the list of queues being serviced, reset the printer, wait a few minutes, then look for the queue in the list again. 4 If your queue still does not appear in the list of queues being serviced, you have a print server setup problem. Reconfigure the MarkNet print server. Novell NetWare 97