Lexmark Optra C710 Setup Guide - Page 26
Installing adapters, Ethernet 10BaseT and 10Base2
View all Lexmark Optra C710 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Installing adapters You can install the following adapters in your printer: • Print server • Tri-port adapter • Parallel port adapter • Hard disk • USB adapter • Fax modem adapter A print server (sometimes called an Internal Network Adapter or INA), such as the MarkNetTM N2001e, lets you connect the printer to a Local Area Network (LAN). MarkNet N2000 print servers support the following: • Ethernet 10BaseT and 10Base2 • Ethernet 10/100BaseTX • Token-Ring The tri-port adapter provides connectors for the following: • Serial interface (RS-232C or RS-422), which can also serve as a receive-only fax port • LocalTalk network • An infrared adapter The parallel port adapter provides an additional parallel port. Its IEEE 1284C connector requires a 1284 A-C cable. You can purchase a 3 m (9.8 ft) cable, Lexmark part number 43H5171, meeting these specifications. Refer to the documentation that came with your adapter for more information. Note: Depending on your printer model, you may already have a MarkNet N2001e print server installed in one of the option slots. There are three available option slots on your interconnect board. All option slots support network, tri-port, parallel port, USB, and Fax modem adapters. Hard disk adapters must be installed in option 3. 22 Installing adapters