Lexmark Optra C710 Setup Guide - Page 30
Removing an adapter, and EMI shield on if the rear cover is still
View all Lexmark Optra C710 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Removing an adapter You need a number 2 Phillips screwdriver to remove an adapter. 1 Compete the steps for "Removing the rear cover and EMI shield" on page 7 if the rear cover is still installed. Warning! Adapters are easily damaged by static electricity. Touch something metal before you touch an adapter. 2 Remove the two screws securing the adapter to the connector bracket. Screws 26 Removing an adapter
26
Removing an adapter
Removing an
adapter
You need a number 2 Phillips screwdriver to remove an
adapter.
1
Compete the steps for “Removing the rear cover
and EMI shield” on page 7 if the rear cover is still
installed.
Warning!
Adapters are easily
damaged by static electricity.
Touch something metal before
you touch an adapter.
2
Remove the two screws securing the adapter to the
connector bracket.
Screws