Lexmark Optra C710 Setup Guide - Page 92
Configuring and printing, TCP/IP
View all Lexmark Optra C710 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
Configuring and printing About the Drivers, MarkVision and Utilities CD You may have received more than one version of the Drivers, MarkVision and Utilities CD, with different Lexmark products. Always use the latest version CD. Troubleshooting For troubleshooting information, look on the Drivers, MarkVision and Utilities CD. Click View Documentation and look for the MarkNet link. Use the table below to locate your next step Your network environment is... TCP/IP Novell NetWare AppleTalk OS/2 Warp Server Turn to page 88 93 95 95 TCP/IP Set the IP address, netmask, and gateway Note: For instructions on other ways to set the IP address, look on the Drivers, MarkVision, and Utilities CD. Click View Documentation and look for the MarkNet link. You must assign an IP address, netmask, and gateway to the print server for other network devices to find the printer on the network. • If you have DHCP, the proper address values are automatically assigned. To verify the assignment has happened, print a network setup page and make sure the IP address, netmask and gateway appear as non-zero. • If you don't have DHCP, there are other methods you can use to manually assign the address such as: 88 Configuring and printing