Lexmark Optra C710 Setup Guide - Page 13
Installing memory, Complete the steps Removing the rear cover
View all Lexmark Optra C710 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Installing memory Note: Memory options designed for other Lexmark printers may not work with your printer. Refer to the User's Guide for more information. Memory connectors Your printer comes with at least 32MB already installed. (Some printer models may have more standard memory.) You can purchase many different memory options from Lexmark for the three memory slots in your printer. The maximum amount of usable memory is 384MB. Make sure you use SDRAM DIMM memory cards that meet the following criteria: - 100 MHz or greater - 100 pin - 4K refresh rate - unbuffered, non ECC - x32 - 3.3V If you need to remove a memory card first, see "Removing a memory card" on page 13. To install optional memory: 1 Complete the steps "Removing the rear cover and EMI shield" on page 7 if the rear cover is still installed. 2 Locate the memory connectors on the system board as shown. Each connector can support either a printer memory card or a flash memory card. Resident Code Card DO NOT REMOVE card if present Note: Your printer may not have a Resident Code Card. Installing memory 9