Lexmark Optra C710 Setup Guide - Page 52
Remove the protective paper from the back of, printer or on the printer for the Quick Refer
View all Lexmark Optra C710 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
203 mm (8 in.) 786 mm (31 in.) 203 mm (8 in.) 864 mm (34 in.) 532 mm (21 in.) 381 mm (15 in.) 1445 mm (57 in.) Quick Reference sleeve Note: Do not cover the vent holes on the printer. 2 Place printer on a flat, stable surface in a well- ventilated area. Allow space in front of printer for easy tray removal and paper loading. The following guidelines will help to ensure proper printer operation and prevent print quality problems. They will also extend the life of your printer and supplies. Do not place the printer: - In direct sunlight - Near heat sources or air conditioners - In dusty or dirty environments 3 Find a convenient location for the Quick Refer- ence card: a Locate a visible spot in the vicinity of the printer or on the printer for the Quick Reference sleeve. b Remove the protective paper from the back of the plastic sleeve. c Firmly attach the adhesive-backed sleeve to the designated area. 48 Position the printer