Lexmark Optra C710 Setup Guide - Page 36
Place the drawer unit in the location you have cho, sen for your printer., duplex option.
View all Lexmark Optra C710 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
203 mm (8 in.) 228 mm (9 in.) 203 mm (8 in.) 864 mm (34 in.) 532 mm (21 in.) 381 mm (15 in.) 1445 mm (57 in.) 2 Place the drawer unit in the location you have cho- sen for your printer. The following guidelines will help to ensure proper printer operation and prevent print quality problems. They will also extend the life of your printer and supplies. Place the drawer unit on a flat, stable surface in a well-ventilated area. Leave enough space around the drawer unit for ventilation and easy access. Leave space in front of the drawer unit to allow for easy paper loading. If you plan to install a duplex unit, leave additional room behind the drawer unit as well. You will need (507 mm, 20 in.) behind the drawer unit if you plan to install a duplex option. Do not place the drawer unit: - In direct sunlight - Near heat sources or air conditioners - In dusty or dirty environments Use the table below to locate your next step Do you need to... "Install the optional duplex unit", see page 37 Continue with printer setup, see page 33 32 Set up the optional drawer unit