Lexmark Optra C710 Setup Guide - Page 72

68

Connecting an external fax modem

b

Continue to press

Menu>

or

<Menu

until you see

the

FAX MENU

.

c

Press the

Select

button.

Fax Port

appears on the second line of the display.

d

Press the

Select

button.

e

Press

Menu>

or

<Menu

until the serial port you

want to set up as a fax port appears on the sec-

ond line of the display.

For example, if you installed a tri-port adapter in

connector 2,

look for

Ser Option 2

.

f

Press the

Select

button.

The printer resets. You are now ready to receive

faxes.

Refer to the printer

User’s Guide

for information about

changing the fax communication settings, such as baud

and parity.

Note:

Do not attempt to con-

figure the serial port for multiple

uses with an A-B switch.

To disable the fax modem and restore the printer serial

port to normal use:

1

From the printer operator panel:

a

Press the

Menu>

or

<Menu

button to enter the

menus.

b

Continue to press

Menu>

or

<Menu

until you see

FAX MENU

displayed.

c

Press the

Select

button.

Fax Port

appears on the second line of the display.

d

Press the

Select

button.

e

Press

Menu>

or

<Menu

until

Disabled

appears on

the second line of the display.

f

Press the

Select button to reset the printer

.

2

Place the modem power switch to off (O).

FAX MENU

Fax Port

1

Menu

2

Select

3

Go

5

Return

4

Stop

6

Section	Page
Table of contents	3
Using your documentation 1	3
Step 1: Unpack the printer 3	3
Step 2: Install memory and network options 7	3
Step 3: Set up the optional drawer unit 31	3
Step 4: Install the optional duplex unit 37	3
Step 5: Position the printer 47	3
Step 6: Install the transfer belt 49	3
Step 7: Install the coating roll 53	3
Step 8: Install the printcartridges 59	3
Step 9: Attach the cables 65	3
Step 10: Load the paper tray 73	3
Step 11: Verify setup 79	3
Step 12: Load MarkVision and drivers 85	3
Step 13: Configure the network printer 87	3
Index 101	3
Using your documentation	5
About this book	5
Step 1: Unpack the printer	7
Identifying printer parts	8
Step 2: Install memory and network options	11
Removing the rear cover and EMI shield	11
Installing memory	13
Removing a memory card	17
Flash Memory Option	18
Hard disk option card	24
Attaching a harddisk	24
Installing adapters	26
Removing an adapter	30
Installing the EMI shield and rear cover	32
Step 3: Set up the optional drawer unit	35
Step 4: Install the optional duplex unit	41
Installing the duplex unit base	41
Installing the rear assembly	46
Installing the topassembly	48
Step 5: Position the printer	51
Step 6: Install the transfer belt	53
Step 7: Install the coating roll	57
Step 8: Install the printcartridges	63
Step 9: Attach the cables	69
Cable information	69
Connecting an external faxmodem	71
Connect infrared adapter	74
Step 10: Load the paper tray	77
Loading the paper trays	77
Load multipurpose feeder	80
Loading envelopes	82
Step 11: Verify setup	83
Printing the menu settings	84
Changing the PaperType setting	85
Printing an adapter setup page	87
Step 12: Load MarkVision and drivers	89
Load drivers	89
Congratulations!	90
Step 13: Configure the network printer	91
Configuring the printer for your network	91
Printing a network setup page	91
Configuring and printing	92
Novell NetWare	97
AppleTalk	99
OS/2 Warp Server	99
Troubleshooting	100
Novell NetWare	101
Windows NT Server 4.0	102
AppleTalk	103
Other network environments	104
Index	105
A	105
B	105
C	105
D	105
E	105
F	106
H	106
I	106
L	106
M	106
N	106
O	106
P	107
R	107
S	107
T	107
U	107
V	107

Lexmark Optra C710 Setup Guide - Page 72

FAX MENU, Fax Port, ond line of the display.

Page 72 highlights