Lexmark Optra C710 Setup Guide - Page 29
Gently tighten the screws to secure the adapter., into the adapter.
View all Lexmark Optra C710 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
4 Align the adapter connector with the connector on the interconnect board. 5 Push the adapter firmly into the connector until it is seated on the interconnect board. The two connectors should fit snugly together. Interconnect board 6 Insert the two screws saved from the adapter cover (or the extra screws shipped with the adapter) through the holes in the connector bracket and into the adapter. 7 Gently tighten the screws to secure the adapter. 8 Repeat steps 2 through 7 to install another adapter. 9 Continue with "Installing the EMI shield and rear cover" on page 28. Screws Installing adapters 25
25
Installing adapters
4
Align the adapter connector with the connector on
the interconnect board.
5
Push the adapter firmly into the connector until it
is seated on the interconnect board.
The two connectors should fit snugly together.
6
Insert the two screws saved from the adapter cover
(or the extra screws shipped with the adapter)
through the holes in the connector bracket and
into the adapter.
7
Gently tighten the screws to secure the adapter.
8
Repeat steps 2 through 7 to install another adapter.
9
Continue with “Installing the EMI shield and rear
cover” on page 28.
Interconnect board
Screws