Lexmark Optra C710 Setup Guide - Page 74
Connect infrared adapter, Unplug the printer power cord from the electrical
View all Lexmark Optra C710 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Connect infrared adapter Adapter cable You can use an infrared adapter to print remotely from a computer equipped with an infrared port. The optional tri-port adapter, which includes an infrared port, lets you connect the infrared adapter to your printer. After you have installed the tri-port adapter, complete the following steps to connect the infrared adapter to your printer: 1 Make sure the printer power is off (O). 2 Unplug the printer power cord from the electrical outlet. 3 Locate the infrared port at the left rear of printer. The infrared port is attached to the tri-port adapter you installed earlier. 4 Plug the adapter cable into the infrared port. 5 Plug the printer power cord into a properly grounded electrical outlet. 6 Place the printer power switch to on (I). If the light on the infrared adapter comes on when the printer power is on, the adapter is plugged into the printer port correctly. 70 Connect infrared adapter