Lexmark Optra C710 Setup Guide - Page 71
Connecting an external faxmodem, Plug the modem power cord into a properly
View all Lexmark Optra C710 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
Connecting an external fax modem To printer serial port Power cord Modem cable External class 1 fax modem Phone cord If you installed an optional tri-port adapter in your printer, you can attach an external, class 1 fax modem to the serial port on the adapter. You can then use your printer to receive faxes. Faxes received print in black only. You cannot send faxes from your printer. To set up the serial port to receive faxes: 1 Make sure the printer power is off (O) and the power cord is unplugged. 2 Place the modem power switch to off (O). 3 Follow the instructions included with the modem to connect the modem to the serial port. The modem connects to the printer in the same way it would connect to a computer. Make sure the modem cable has a 25-pin connector to attach to the serial connector on the printer. 4 Plug the modem power cord into a properly grounded electrical outlet. 5 Place the modem power switch to on (I). You must turn the modem on before you turn on the printer. 6 Plug the printer power cord into a properly grounded electrical outlet. 7 Place the printer power switch to on (I). 8 From the printer operator panel: a Press the Menu> or