Motorola WA840GP User Guide - Page 16

LED Description - model

Get Motorola WA840GP - Wireless Access Point Router PDF manuals and user guides
UPC - 612572118740
View all Motorola WA840GP manuals
Add to My Manuals
Save this manual to your list of manuals

Page 16 highlights

Section 1 Overview LED Description The underlined items represent network activity. LED 1 Power Condition ON Color Status Green The device is powered on and operating normally. ON OFF Red None The Power LED turns RED as soon as the reset button is depressed. If the reset button is held down, the LED starts to blink RED, and the access point's username, password, private LAN IP address, private subnet mask address and operation mode are restored to factory default settings. If the Power LED stays RED for longer than 5 seconds, this indicates that the firmware is corrupted and needs to be restored. The device is not powered on. 2 Wireless OFF ON/Blinking None Green The wireless interface is not enabled by the firmware. The wireless interface is enabled / active traffic present. NOTE: The wireless LED does not blink on WA840G "Version 1" hardware. You can determine your version of hardware by looking at the product label on the bottom of the access point. Within the box that includes the FCC logo, a "Version 1" unit will display "MODEL: WA840G", while a "Version 2" unit will display "MODEL: WA840Gv2" (see example below). 3 Device ON/Blinking Amber ON/Blinking Green OFF None 10BaseT link detected/active traffic present. 100BaseT link detected/active traffic present. No external Ethernet device has been attached and detected. The Ethernet link is down. 1-10 WA840

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
Section 1
Overview
1-10
WA840
LED Description
The underlined items represent network activity.
LED
Condition
Color
Status
1
Power
ON
Green
The device is powered on and operating normally.
ON
Red
The Power LED turns
RED
as soon as the reset
button is depressed. If the reset button is held down,
the LED starts to blink
RED,
and the access point’s
username, password, private LAN IP address,
private subnet mask address and operation mode
are restored to factory default settings.
If the Power LED stays
RED
for longer than 5
seconds, this indicates that the firmware is corrupted
and needs to be restored.
OFF
None
The device is not powered on.
2 Wireless
OFF
None
The wireless interface is not enabled by the
firmware.
ON/Blinking
Green
The wireless interface is enabled / active traffic
present
.
NOTE
: The wireless LED does not blink on WA840G
“Version 1” hardware.
You can determine your
version of hardware by looking at the product
label on the bottom of the access point.
Within
the box that includes the FCC logo, a “Version 1”
unit will display “MODEL: WA840G”, while a
“Version 2” unit will display “MODEL:
WA840Gv2” (see example below).
3
Device
ON/Blinking
Amber
10BaseT link detected/active traffic present
.
ON/Blinking
Green
100BaseT link detected/active traffic present
.
OFF
None
No external Ethernet device has been attached and
detected. The Ethernet link is down.