Motorola WA840GP User Guide - Page 23
Easy Software Setup, Wired Connection to Access Point - reset
UPC - 612572118740
View all Motorola WA840GP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Installation Section 2 Easy Software Setup Run the Installation Wizard program from the supplied CD-ROM to quickly set up your network. Once your network is up and running, refer to Section 3: Configuration for advanced configuration. Manual Software Setup If you'd prefer to manually set up your network, use this section to configure it. This section details the physical connection of the access point to your network as well as the configuration needed by your PC. To set up your wireless network: Physically connect and power on the access point Configure your PCs Enter Wireless Security settings Wired Connection to Access Point Power Reset LAN Antenna If you are connecting your PC with an Ethernet cable to the access point, your PC must be installed first with an Ethernet adapter. You need one Ethernet cable for this procedure, to connect the PC to the access point. 1 Using the supplied Ethernet cable, connect one end of the cable to your PC's Ethernet adapter and the other end to the LAN port on the access point. 2 To configure the initial settings of the access point, please see Configuring your Computers in this section. 3 Your PC's Ethernet adapter may need to be configured to work with the WA840. WA840 2-7