Motorola WA840GP User Guide - Page 51
WAN Commonly Used Configuration Options
UPC - 612572118740
View all Motorola WA840GP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Configuration Section 3 WAN Page - Commonly Used Configuration Options The following configuration options are highlighted in white on the WAN Page, for easy reference. These fields are the most commonly used or adjusted, in supporting typical uses of the WA840 as a wireless-only router. The rest of the configuration options are provided primarily for advanced users. Field Connection Mode: PPPoE Username: PPPoE Password: PPPoE Service Name: Description Sets the method by which an IP address is assigned to the WA840's broadband connection. Select as follows: DHCP - An IP address is dynamically assigned to the WA840, as per the Dynamic Host Configuration Protocol (DHCP). This is typically used with cable modems or gateways, and DSL gateways. Static - An IP address is manually assigned to the WAN connection. PPPoE - Point-to-Point Protocol over Ethernet (PPPoE) is used. PPPoE is typically used with DSL modems. Disabled - The WAN connection is disabled. FACTORY DEFAULT: Static [FOR CONNECTIONS USING PPPoE PROTOCOL] Sets the username for authenticating with a Point-to-Point Protocol (PPP) server. This username is provided by your Internet Service Provider (ISP). FACTORY DEFAULT: (blank) [FOR CONNECTIONS USING PPPoE PROTOCOL] Sets the password for authenticating with a PPP server. This password is provided by your ISP. FACTORY DEFAULT: (blank) [FOR CONNECTIONS USING PPPoE PROTOCOL] Sets the service name as per information provided by your ISP. May be automatically detected and entered for you; otherwise it will need to be entered manually. FACTORY DEFAULT: (blank) WA840 3-17